JULIAN HALES
10-25-2004, 05:09 PM
"Mike G" <mikgibbs@tiscali.co.uk> wrote in message
news:2svovkF1q865gU1@uni-berlin.de...
>
> "JULIAN HALES" <julianhales@blueyonder.co.uk> wrote in message
> news:Lgkad.32222$BI5.20729@fe2.news.blueyonder.co. uk...
> > Sods law the last 1 of 8.
> >
> > Round and soft, tried moles but not a chance, in a corner so not a great
> > place or much room, cant cut off and i cant get no heat to it.
> >
> > I thought about whacking and trying to shape or chisel off.
> >
> > Any tips?
>
> You could try whacking a slightly undersize hex, not bihex, socket onto
it.
> I've also had fairly good results to loosen tight nuts them with a cold
> chisel.
> Digging it into the side, then hitting it in the unscrewing direction.
> Though if they're very tight it simply cuts the corner off the nut.:-)
> Mike.
that about i think all i can try, if i could get it off the car i would be
happy.
>
news:2svovkF1q865gU1@uni-berlin.de...
>
> "JULIAN HALES" <julianhales@blueyonder.co.uk> wrote in message
> news:Lgkad.32222$BI5.20729@fe2.news.blueyonder.co. uk...
> > Sods law the last 1 of 8.
> >
> > Round and soft, tried moles but not a chance, in a corner so not a great
> > place or much room, cant cut off and i cant get no heat to it.
> >
> > I thought about whacking and trying to shape or chisel off.
> >
> > Any tips?
>
> You could try whacking a slightly undersize hex, not bihex, socket onto
it.
> I've also had fairly good results to loosen tight nuts them with a cold
> chisel.
> Digging it into the side, then hitting it in the unscrewing direction.
> Though if they're very tight it simply cuts the corner off the nut.:-)
> Mike.
that about i think all i can try, if i could get it off the car i would be
happy.
>