Obd2 Iso9141/ Kwp2000 Interface [Archive] - Used Car Forums

PDA

View Full Version : Obd2 Iso9141/ Kwp2000 Interface



bynkaay
03-23-2005, 08:05 AM
OBD2 ISO9141/ KWP2000 INTERFACE
http://www.nkaay.com/readyunits.htm

This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example
by: - Volkswagen , - Audi , - Skoda , - Seat AND modification for Renault,Peugeut,Citreon,Opel Astra,corsaC,etc.
Terminal K = Communication Bus.
Terminal L = Ignition for working up car computing system (ECU: Engine Control Unit) .
Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW .
This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol).

they working with our new obd interface .
you must have to pay if you need For .exe's.

RENAULT JAEGER (it is not via diagnose)
OPEL NEC78082x via diagnose
CITROEN SAXO with NEC-780826-GC
VAG EEPROM Programmer V1.0
VAG DASH TOOL byGOPEL
DASHBOARD OPEL TOOL v08
BOSCH AIRBAG RESET TOOL by GOPEL
Volkswagen AIRBAG soft can erase from diagnose
Volkswagen airbag Pcvw39.exe
VAG- Magnetti Marelli
AUDI-VW TOOL VERSION 2.0.9
VAG-COM
etc.

www.nkaay.com
byNkaay