brake or axel problem

[ramdodge]

i have 1993 crown victoria. getting thumping from drivers side rear,so i
put on jackstands and took off tires.i noticed wobbling in rotor and
caliper. changed rotor, pads,and caliper. still there when i put in drive
and give it gas. i can tell because car is on stands with tires off.i took
off caliper and noticed if i pull back and forth on rotor i get about 1/2"
play in the axel. do i have something in there wrong? i have disconnected
the emergency brake. thank you for your help.

[whose ya daddy 96@ yahoo.com]

On Sun, 15 May 2005 18:29:53 -0400, "ramdodge"
<badgervine@sbcglobal.net> wrote:

>i have 1993 crown victoria. getting thumping from drivers side rear,so i
>put on jackstands and took off tires.i noticed wobbling in rotor and
>caliper. changed rotor, pads,and caliper. still there when i put in drive
>and give it gas. i can tell because car is on stands with tires off.i took
>off caliper and noticed if i pull back and forth on rotor i get about 1/2"
>play in the axel. do i have something in there wrong? i have disconnected
>the emergency brake. thank you for your help.
lmfao
its rear axle time
ya foctard

hurc ast

[ramdodge]

a holes like you is what make people not want to use forums

[whose ya daddy 96@ yahoo.com]

On Sun, 15 May 2005 19:07:26 -0400, "ramdodge"
<badgervine@sbcglobal.net> wrote:

>a holes like you is what make people not want to use forums

lmfao
U GO GIRL
tards like you make me rich

hurc ast

[ramdodge]

i never paid you anything i just asked for friendly advice i thought that
what this forum was for why do you bother to reply

[whose ya daddy 96@ yahoo.com]

On Sun, 15 May 2005 19:25:00 -0400, "ramdodge"
<badgervine@sbcglobal.net> wrote:

>i never paid you anything i just asked for friendly advice i thought that
>what this forum was for why do you bother to reply

i told ya its axle time
cant ya read
ya foctard
u go girl

hurc ast
ford mastertech

[Jim Warman]

Being able to push the axle into and out of the housing a certain amount is
quite normal. It does sound like there is the possibility of a bent axle
flange requiring the replacement of the axle. You could have someone check
the axle flange runout just to be sure.


"ramdodge" <badgervine@sbcglobal.net> wrote in message
news:1289545f08fd48babca7be4620bb149f@localhost.ta lkaboutautos.com...
> i have 1993 crown victoria. getting thumping from drivers side rear,so i
> put on jackstands and took off tires.i noticed wobbling in rotor and
> caliper. changed rotor, pads,and caliper. still there when i put in drive
> and give it gas. i can tell because car is on stands with tires off.i took
> off caliper and noticed if i pull back and forth on rotor i get about 1/2"
> play in the axel. do i have something in there wrong? i have disconnected
> the emergency brake. thank you for your help.
>

[ramdodge]

thank you for your help.