Easy 2 Fit 3 Pedal Floor Mounted Pedal Box, with Bias Bar and black powder coat. [Archive] - Used Car Forums

PDA

View Full Version : Easy 2 Fit 3 Pedal Floor Mounted Pedal Box, with Bias Bar and black powder coat.


Optimum Balance Products
09-16-2006, 06:43 PM
Go To www.obp.uk.net and order now.
Easy 2 Fit 3 Pedal Floor Mounted Pedal Box, with Bias Bar and black powder coat.
This pedal box can be fitted with a bias bar system and dual master cylinders. This gives a twin fully adjustable braking system using 2 master cylinders. (The Master Cylinders, and Reservoirs are not Included in this kit)
This has been fitted into all types of cars from kit cars, race cars, hot rods etc. It is a very versatile system.
Pedal Box: 250mm Long x 130mm High x 130mm Deep (Approx)
Bias Bar:35mm Long Mild Steel 7/16 UNF Thread centre piece, Central Ball 25mm Radius, 2 x Aluminium Clevis with 3/8 (to fit most master cylinder push rods) Approx sizes.
This pedal box is a floor mounted Brake and Clutch unit with the Accelerator pedal dropping in from the top.
This Pedal box can come with provisions for Cable or a Hydraulic Clutch, just specify when ordering.
Stop giving yourself grief and get an easy to fit Pedal Box, this will make your life and build so much easier.
Cost: £95
Delivery in the UK: £15
Go To www.obp.uk.net and order one now.