How to uninstall alarm

[rocker]

Hello
I have a 1992 Ford Bronco with a Mirage alarm model 9000.What I realy would
like to do is uninstall it because it goes off if the wind blows.I have
turned the shock sensor off and it still goes off. I unhooked the power and
then it wont start. What would I have to do to completely remove it? Thanks

[Shoe Salesman]

you have to re-connect the starter wires under the dash that the alarm uses
to kill the starter. look for a wire cut in two and a relay between them,
then just connect them back together.
"rocker" <rocker@verizon.net> wrote in message
news:dldee.7547$db7.3967@trnddc01...
> Hello
> I have a 1992 Ford Bronco with a Mirage alarm model 9000.What I realy
> would like to do is uninstall it because it goes off if the wind blows.I
> have turned the shock sensor off and it still goes off. I unhooked the
> power and then it wont start. What would I have to do to completely remove
> it? Thanks
>
>
>
>

[rocker]

Thanks...
"Shoe Salesman" <someone@microsoft.com> wrote in message
news:BPeee.21264$R46.17639@tornado.socal.rr.com...
> you have to re-connect the starter wires under the dash that the alarm
> uses to kill the starter. look for a wire cut in two and a relay between
> them, then just connect them back together.
> "rocker" <rocker@verizon.net> wrote in message
> news:dldee.7547$db7.3967@trnddc01...
>> Hello
>> I have a 1992 Ford Bronco with a Mirage alarm model 9000.What I realy
>> would like to do is uninstall it because it goes off if the wind blows.I
>> have turned the shock sensor off and it still goes off. I unhooked the
>> power and then it wont start. What would I have to do to completely
>> remove it? Thanks
>>
>>
>>
>>
>
>

[rocker]

Thanks Shoe Salesman...it worked...The alarm is in the
trash...YEEHAW...rocker
"Shoe Salesman" <someone@microsoft.com> wrote in message
news:BPeee.21264$R46.17639@tornado.socal.rr.com...
> you have to re-connect the starter wires under the dash that the alarm
> uses to kill the starter. look for a wire cut in two and a relay between
> them, then just connect them back together.
> "rocker" <rocker@verizon.net> wrote in message
> news:dldee.7547$db7.3967@trnddc01...
>> Hello
>> I have a 1992 Ford Bronco with a Mirage alarm model 9000.What I realy
>> would like to do is uninstall it because it goes off if the wind blows.I
>> have turned the shock sensor off and it still goes off. I unhooked the
>> power and then it wont start. What would I have to do to completely
>> remove it? Thanks
>>
>>
>>
>>
>
>

[Shoe Salesman]

Cool! Now go buy some theft insurance. You will get a better rate if you
have an alarm on the car :O ;}
(sorry, couldn't resist)


"rocker" <rocker@verizon.net> wrote in message
news:FYOee.130$_g1.81@trnddc04...
> Thanks Shoe Salesman...it worked...The alarm is in the
> trash...YEEHAW...rocker
> "Shoe Salesman" <someone@microsoft.com> wrote in message
> news:BPeee.21264$R46.17639@tornado.socal.rr.com...
>> you have to re-connect the starter wires under the dash that the alarm
>> uses to kill the starter. look for a wire cut in two and a relay between
>> them, then just connect them back together.
>> "rocker" <rocker@verizon.net> wrote in message
>> news:dldee.7547$db7.3967@trnddc01...
>>> Hello
>>> I have a 1992 Ford Bronco with a Mirage alarm model 9000.What I realy
>>> would like to do is uninstall it because it goes off if the wind blows.I
>>> have turned the shock sensor off and it still goes off. I unhooked the
>>> power and then it wont start. What would I have to do to completely
>>> remove it? Thanks
>>>
>>>
>>>
>>>
>>
>>
>
>